G300 Convertible Laundry Cart

Cart Series: G300
Cart Type: Open

Our G-300 carts are the workhorse of an efficient exchange cart system. The reinforced shelves swing easily to bin position and are held secure without the need for latches or slide bolts. The base shelf is double reinforced to withstand heavy soiled loading. These rugged carts are completely cart washable, and are structurally designed to withstand decades of off-site trucking. Non-standard sizes are available, as well as a variety of caster and bumper options.

Standard Features

Body Structure: All welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open with one lengthways cross brace. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.

Shelf Structure: Base shelf plus two convertible shelves of 16 ga. aluminum sheet with mill applied white baked enamel finish over an all welded aluminum extrusion frame. The shelf sheet is supported on all four sides by the frame, and has one lengthways 1 1/4" square tube center support. Shelves are sloped 5% to back of cart (except base). Shelves are supported by two aluminum 1/4" x 3" corner gussets welded to the cart structure on back and end, and move on stainless steel hinge pins mounted in the front ends of the shelves. Stainless steel stops secure shelves in "bin" position.

Finish: Carts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1).

Casters: Top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.

Bumpers: 6 non-marking corner bumpers.

Options: Closed top, top front bar, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick-ups and your custom requirements.