G100 Fixed Shelf Laundry Cart

Cart Series: G100
Cart Type: Open

Ideal for exchange, top up or bulk delivery, our fixed shelf carts are built to last. Although weighing in at only 100LB (approx), an all-welded construction and integration of the shelves and structural members give this cart exceptional strength. Shelves are reinforced along their entire length and slope 5 degrees to the back, to help secure load and facilitate cart wash. 3, 4, and 5 shelf models are available.

Standard Features

Body Structure: All welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.

Shelf Structure: Base shelf plus two fixed shelves of 16 ga. aluminum sheet with mill applied white baked enamel finish. Shelves are supported by a flange of horizontal extrusion on all four sides of the cart, and one lengthways 1 1/4" square tube center support. Shelves are sloped 5% to back of cart. (except base).

Finish: Carts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1)

Casters: Top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.

Bumpers: 6 non marking corner bumpers.

Options: Closed top, top front bar, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick-ups and your custom requirements.