G400 Bulk Laundry Cart

Cart Series: G400
Cart Type: Open

The G-400 will hold approx 1000LB of payload, and fits 3 across on your truck. A single convertible shelf and triple reinforced base facilitate bulk delivery and soiled return. Hinges and door latched are stainless steel. The doors swing open flush with cart ends. This an extremely heavy-duty cart! Rated capacity: 1000lbs.

Standard Features

Body Structure: All welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open with one lengthways cross brace. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.

Shelf Structure: Base plus one convertible shelf of 16 ga. aluminum sheet with mill applies white baked enamel finish over an all welded aluminum extrusion frame. The shelf sheet is supported on all four sides in the frame, and has three lengthways support sections. The base has two lengthways support sections. (NOTE: Shelf and base are not as pictured) The shelf is flat, and is hinged with S/S piano hinge along the length of the cart back. The convertible shelf is supported on both ends by aluminum angle welded to the cart body. Two top braces situated 4" from each end of the cart are fitted with spring-loaded latches to hold the shelf in the up position.

Doors: Doors are similar to body structure, with full length S/S piano hinge. Latches are hinged S/S channels at the top and bottom of each door. Door swing 270 degrees to lie flush with the cart ends when open.

Finish: Carts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1).

Casters: Top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.

Bumpers: 6 non-marking corner bumpers.

Options: Closed top, top front bar, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick-ups and your custom requirements.