G400 Bulk Laundry Cart

Request a quote

Cart SeriesG400
Cart TypeOpen
DescriptionThe G-400 will hold approx 1000LB of payload, and fits 3 across on your truck. A single convertible shelf and triple reinforced base facilitate bulk delivery and soiled return. Hinges and door latched are stainless steel. The doors swing open flush with cart ends. This an extremely heavy duty cart! Rated capacity: 1000lbs.

Standard Features

Body StructureAll welded 1 1/4" x 11 ga. extruded square corner posts with 3/4" x 14 ga. round tube vertical closure on back, ends and 12" high on front of cart. Patented structural channel horizontal members. Top is open with two cross braces. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.
Shelf StructureBase plus one convertible shelf of 16 ga. aluminum sheet with mill applies white baked enamel finish over an all welded aluminum extrusion frame. The shelf sheet is supported on all four sides in the frame, and has three lengthways support sections. The base has two lengthways support sections. (NOTE: Shelf and base are not as pictured) The shelf is flat, and is hinged with S/S piano hinge along the length of the cart back. The convertible shelf is supported on both ends by aluminum angle welded to the cart body. Two top braces situated 4" from each end of the cart are fitted with spring loaded latches to hold the shelf in the up position.
DoorsDoors are similar to body structure, with full length S/S piano hinge. Latches are hinged S/S channels at the top and bottom of each door. Door swing 270 degrees to lie flush with the cart ends when open.
FinishCarts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1)
CastersCasters are top quality 8", non-marking grey rubber with 600 lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 24" center to center.
Bumpers6 non marking corner bumpers.
OptionsOptions include closed top, top front bar, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick-ups and your custom requirements.

Options

Card Holders
Wrap Around Bumpers
Wear Plates
Casters
Tow Bars
Conveyor/ Forklift Pick-ups
Decals/ Flip cards/ Identifiers
Cart Covers
Corner Bumpers


Standard Sizes


Capacities and Weights


Do you need a quote or have special requirements? Customize your G400

Jump to:

G100
G200
G300
G300-BD
G500
G600
G700
G700BF
G800