G300-BD Convertible Shelf Laundry Cart With 31" Back Door

Request a quote

Cart SeriesG300-BD
Cart TypeOpen
DescriptionOur G-300-BD carts are the workhorse of an efficient exchange cart system. The reinforced shelves swing easily to bin position and are held secure without the need for latches or slide bolts. The base shelf is double reinforced to withstand heavy soiled loading. These rugged carts are completely cart washable, and are structurally designed to withstand decades of off-site trucking. The 31” door swings a full 180 degrees to the open position, and is held in place by a magnetic catch. The door is secured in the closed position with two spring loaded slide bolts. The back door offers a clear ergonomic advantage by allowing the staff unrestricted access to the soiled linen bags.

Standard Features

Body StructureAll welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open with one lengthways cross brace. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.
Shelf StructureBase shelf plus two convertible shelves of 16 ga. aluminum sheet with mill applied white baked enamel finish over an all welded aluminum extrusion frame. The shelf sheet is supported on all four sides by the frame, and has one lengthways 1 1/4" square tube center support. Shelves are sloped 5% to back of cart (except base). Shelves are supported by two aluminum 1/4" x 3" corner gussets welded to the cart structure on back and end, and move on stainless steel hinge pins mounted in the front ends of the shelves. Stainless steel stops secure shelves in "bin" position.
FinishCarts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1)
CastersCasters are top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.
Bumpers6 non marking corner bumpers.
DoorsAll welded 1 1/4" x 11 ga. extruded square tube door frame and horizontal members, with 3/4" x 14 ga. round tube vertical closure. Full length S/S piano hinge allows the 31” door to swing a full 180 degrees to the open position, and is held in place by a magnetic catch. The door is secured in the closed position with two spring loaded slide bolts.

Options

Closed Top
Top Front Bar
Card Holders
Wrap Around Bumpers
Casters
Tow Bars
Conveyor/ Forklift Pick-ups
Decals/ Flip cards/ Identifiers
Hinged Hanger Retention Bar
Cart Covers
Corner Bumpers
Wear Plates


Standard Sizes

ModelOuter Length (Inches)Outer Width (Inches)Height (Inches)Inner Length (Inches)Inner Width (Inches)
G348-BD49.5"23.5"70" 45.5"20.75"
G360-BD61.5"23.5"70" 57.5"20.75"

Capacities and Weights

ModelCapacity (Cu. Ft.)Capacity (Bushels)Approx. Weight (lbs.)
G348-BD3226 120 lbs.
G360-BD4032 140 lbs.

Do you need a quote or have special requirements? Customize your G300-BD

Jump to:

G100
G200
G300
G400
G500
G600
G700
G700BF
G800