G100 Fixed Shelf Laundry Cart

Request a quote

Cart SeriesG100
Cart TypeOpen
DescriptionIdeal for exchange, top up or bulk delivery, our fixed shelf carts are built to last. Although weighing in at only 100LB (approx), an all-welded construction and integration of the shelves and structural members give this cart exceptional strength. Shelves are reinforced along their entire length and slope 5 degrees to the back, to help secure load and facilitate cart wash. 3, 4, and 5 shelf models are available.

Standard Features

Body StructureAll welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.
Shelf StructureBase shelf plus two fixed shelves of 16 ga. aluminum sheet with mill applied white baked enamel finish. Shelves are supported by a flange of of horizontal extrusion on all four sides of the cart, and one lengthways 1 1/4" square tube center support. Shelves are sloped 5% to back of cart. (except base)
FinishCarts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1)
CastersCasters are top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.
Bumpers6 non marking corner bumpers.
OptionsOptions include closed top, top front bar, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick-ups and your custom requirements.

Options

Wrap Around Bumpers
Convertible Shelves
Closed Top
Top Front Bar
Card Holders
Wear Plates
Casters
Tow Bars
Conveyor/ Forklift Pick-ups
Cart Covers
Decals/ Flip cards/ Identifiers
Fixed Stainless Steel Shelves
Corner Bumpers


Standard Sizes

ModelOuter Length (Inches)Outer Width (Inches)Height (Inches)Inner Length (Inches)Inner Width (Inches)
G13637.5"23.5"70" 33.5"20.75"
G14849.5"23.5"70" 45.5"20.75"
G16061.5"23.5"70" 57.5"20.75"

Capacities and Weights

ModelCapacity (Cu. Ft.)Capacity (Bushels)Approx. Weight (lbs.)
G1362420 95 lbs.
G1483226 105 lbs.
G1604032 115 lbs.

Do you need a quote or have special requirements? Customize your G100

Jump to:

G200
G300
G300-BD
G400
G500
G600
G700
G700BF
G800