G-300 Convertible Carts





Other Open Carts
- G-100 Fixed Shelf Carts
- G-200 Fixed Shelf, Open Back Carts
- G-300 Convertible Carts
- G-400 Bulk Carts
- G-500 Garment Carts
- G-600 Bin Carts


Other Enclosed Carts
- G-700 Enclosed
- G-700BF Enclosed with Bifold Doors
- G-800 Semi-Enclosed

Home

Our G-300 carts are the workhorse of an efficient exchange cart system. The reinforced shelves swing easily to bin position and are held secure without the need for latches or slide bolts. The base shelf is double reinforced to withstand heavy soiled loading. These rugged carts are completely cart washable, and are structurally designed to withstand decades of off-site trucking. Non standard sizes are available, as well as a variety of caster and bumper options..

Standard Specifications and Features
Body Structure

All welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open with one lengthways cross brace. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.


Shelf Structure

Base shelf plus two convertible shelves of 16 ga. aluminum sheet with mill applied white baked enamel finish over an all welded aluminum extrusion frame. The shelf sheet is supported on all four sides by the frame, and has one lengthways 1 1/4" square tube center support. Shelves are sloped 5% to back of cart. (except base)
Shelves are supported by two aluminum 1/4" x 3" corner gussets welded to the cart structure on back and end, and move on stainless steel hinge pins mounted in the front ends of the shelves. Stainless steel stops secure shelves in "bin" position.


Finish

Carts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1)


Casters

Casters are top quality 6" diameter, non marking neoprene, with 325lb ea. rated capacity, 2 fixed and two swivel, with fixed casters mounted LHE of cart. Casters are spaced 17 3/4" center to center.


Bumpers

6 non marking corner bumpers.


Options

Options include closed top, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick ups and your custom requirements. For more details, please refer to options section.

Standard Sizes

Outside Inside
Model Length Width Height Length Width
G336 37.5" 23.5" 70" 33.5" 20.75"
G348 49.5" 23.5" 70" 45.5" 20.75"
G360 61.5" 23.5" 70" 57.5" 20.75"

Capacities & Weight

Model Cu. Ft. Bushels Approx. cart wt.
G336 24 20 100 lbs.
G348 32 26 110 lbs.
G360 40 32 130 lbs.
For more information on G.S.M. Carts
Email us.
Top Of Page - Home